SKP900 key programmer experience on Ford Explorer 2013

Share from http://blog.obdii365.com

I bought a SKP900 car key programmer from a seller on Facebook lately. I have been looking for a good chance to get one and finally as its price dropped to $639 including shipment, I pulled the trigger immediately.

The SKP900 programmer is smaller and more delicate than I thought. It is basically as big as my hand. But what it can do is amazing! I programmed two smart keys for 2013 Nissan Altima and today replace a new remote for Ford Explorer 2013 today without reading pin code because the tool is able to do it for me. It is a plug and play device and the whole process took less than 15 minutes.

Below are some pictures of me and the SKP900 key programmer:



Video: Upgrade Video for SKP 900 Key Programmer

http://www.key-programmer.org

SKP900 Key programmer Operation Video

Upgrade SKP-900 Key Programmer

SKP-900 Program a FORD FOCUS Remote Key

SKP-900 Program 2014 Honda Remote Key

SKP900 Program a Range Rover 2014 Key

SKP-900 Program a Range Rover 2012 Key

SKP900 Program a LEXUS Smart Key

SKP900 Key Programmer Program ID46 Nissan Key

Step 1 Connect SKP-900 Key Programmer to a Nissan OBD connector via Main Cable, start the car with a remote and wait a few seconds for SKP900 to start.

Step 2 Select Nissan, New Structure and choose Yes to continue.

Step 3 Select Key 1 and choose Yes


Step 4 Select Immobilizer System according to the cars Immo and choose Yes.


Step 5 Wait for a few minutes until SKP900 communicates with the car.


Step 6 Select Function, System Selection then Key Adapt and choose Yes.


Step 7 Choose Yes.


Step 8 According to the instruction on screen, you should insert a new key and turn IGN on. You may see the IMMO indicator light will flash when inserting a key which cannot start engine. Select Yes.

Step 9 Close IGN switch and select Yes.


Step 10 Wait for system adapting and then open IGN switch and select Yes.


Step 11 Wait for a few minutes and the key is programmed successfully.

How to SKP900 key programmer white screen problem

It’s very seldom that you will get white screen problem when programming keys with SuperOBD SKP900 auto key programmer. Here is the proper solution provided.

Problem:
When programming VW Passat 2010 key with SKP900 key programmer, the process was going nicely, but the SKP900 device went white with stripe flashing halfway (error screenshots token below)

Solution:
1) Disconnect the device from OBD socket
2) Download the SKP900 update tool and re-activate/reset the key programmer
Free download SKP900 update tool
http://down.obd365.com/skp900-update-tool-v2.4.zip
Free download SKP900 activation tool
http://down.obd365.com/skp900-activation-tool.zip
3) If your SKP900 is the not latest version, update it to V3.5 follow the instruction below:
http://www.obdii365.com/upload/pro/201404/how-to-add-free-tokens-for-skp900-obd365.pdf
4) When the SKP900 hand-held OBD2 key programmer re-flash is complete, program the key again.

SKP900 program Honda CR-V key lost via immo

Here is the detail instruction on programming Honda CR-V key when all key lost with original SuperOBD SKP900 hand-held OBD2 key programmer (current V3.5) within 2 minutes.

Step-by-step instruction:
Plug the SKP900 auto key programmer with vehicle using main cable via OBD socket
Select vehicle make Honda and CR-V
Select “ALL KEY LOST” in function selection menu

Select program key from “IMMOBILIZER SYSTEM”

Select Honda CR-V IMMO type　“IMMOBILIZER 2”

The system will prompt choose which adapter will you use and turn ignition ON

Again select “ALL KEY LOST”
Insert Key and ignition ON
Enter key number to be programmed and confirm

Turn OFF the key
Turn ignition to ON
Processing PROGRAMMING
Turn key off in 15 seconds
Adapt key success; the first has been successfully programmed. Insert a new key in 15 seconds and turn ignition to ON

Turn key off in 15 seconds
Turn ignition to ON
Turn off the key
Turn ignition ON
SKP-900 will prompt indicator light off, press “YES EXTINGUISH” to continue

Turn off the key
You may see the IMMO indicator light will flash when inserting a key which cannot start engine
Follow the SKP900 automotive key programmer prompt until the second key has been programmed
Disconnect the SKP900 key pro from vehicle
Try the new programmed key
SuperOBD SKP900 key programmer white screen problem
http://blog.obdii365.com/2015/07/14/superobd-skp900-key-programmer-white-screen-problem/

SuperOBD V3.5 SKP-900 SKP900 OBD2 Auto Key Programmer

SuperOBD SKP-900 Key Programmer is Hand-held OBD2 key programmer
1. Newest version: V3.5
2. Monthly FREE update. Lifetime Free Update Online
3. Support almost all cars in the market.
4. You can use it directly, no tokens limitation.

 

Top 6 Reasons to Get SKP-900:

1. Support TOYOTA G Chip and H Chip

2. Support all key lost

3. No need pincode when programming keys for many vehicles
4. No tokens limitation. You can program as many cars as you want

5. Can read pin code by OBD2 for many vehicles, only a few vehicles need to get pincode from local 4S shop or other places

6. Language: English, if you want Portuguese Version, please click SKP-900 Portuguese Version 

Related Download Files:
  how-to-update-skp900-obd365.pdf  (179.1K)
  sk155-skp-900-supported-models.pdf  (96.3K)
  how-to-add-free-tokens-for-skp900-obd365.pdf  (138.4K)
  superobd-skp900-auto-key-programmer-user-manual-obd365.pdf  (1,504.7K)

SKP-900 key programmer Software: SKP900 Activation Tool Free Download
SKP900 Update Tool Free Download