SKP900 program Hyundai santafe smat key error

Problem:
I need to program smart key for Hyundai santafee 2007 all keys lost,i use SuperOBD skp900 key programmer,but it give me the error (wrong pin code)
any information pls?




Customer solution:


Did you get 2 pin code some of them have old & new try new code?



If you used a old pin , try to use new pin code it will work , pin by vin usually give old pin so it will be wrong pin.




Had the same problem 2 weeks ago with SKP900. Ended up connecting a zed-full via PC to get a proper PIN that worked



The santa fe uses id46. it should be possible to read pin directly on Hyundais with id46 keys, rather than using the vin-pin calculator.
I had this problem once though and ended up reading with abritus, and gave different pin that did work.

http://www.obdii365.com/wholesale/car-key-programmers/

SKP900 key programmer stay on power-up screen?

Problem:

After i power on the SuperOBD skp900 key programmer, it stayed on power-on menu,cannot move to next step, does it require an upgrade? (see error screen display)

Obd365.com engineer solution:
Yes, you should update your skp-900 until the upgrade is successful.

The latest SKP900 version goes to V4.3.

SuperOBD SKP-900 V4.3 Update:

1. MAZDA Axela Smart Key free code program 2007 ~ 2015

2. MAZDA ATENZA Smart Key free code program 2007 ~ 2015

3. MAZDA CX-5 Smart Key free code program 2007 ~ 2015

Free download SKP900 V4.3 Update Software

http://www.obdii365.com/upload/pro/201404/how-to-update-skp900-obd365.pdf

SuperOBD SKP900 key programmer update to V4.3

Original SuperOBD SKP900 hand-held OBD key programmer software has newly updated to V4.3.

SKP-900 V4.3 Update Feature:

1. MAZDA Axela Smart Key free code program 2007 ~ 2015
2. MAZDA ATENZA Smart Key free code program 2007 ~ 2015
3. MAZDA CX-5 Smart Key free code program 2007 ~ 2015

Free download SKP900 V4.3 software 
https://mega.nz/#!EkMAUA6S!yYQhC3Ns6mkt0ZstLESIoOXUY7yFwiv9BA8GtnIGbeY

How to update SKP900 Key Programmer

SKP900 key programmer now is on promotion, price is down to US$529, ship from U.S warehouse directly.

Promotion valid: Aug. 15,2016-Aug.31,2016

How to add key for Ford Mustang with SKP900

Here is the tutorial on Ford Mustang 2014 year key programming by using original SuperOBD SKP900 hand-held OBD2 key programmer.  

Step-by-step procedure:

Step 1: Connect SKP900 Key Programmer to the car via OBD diagnostic socket, and turn it on, enter” SYSTEM SELECTION” and choose” IMMOBILIZER SYSTEM”

Step 2: Insert the car key into keyhole, and turn ignition to the position “ON”, skp-900 will prompt to choose OBDII adpater, just click “Yes” to continue.  communicating pls wait…

Step 3: Select “DELETE KEY” when enters into “FUNCTION SELECTION”

interface. Choose “Yes” to continue.

Prepare minimum 2 keys to perform deletion.

Step 4: Current number of keys:2. And click ”Yes” again to continue.

Note: The procedure takes approx 10 mins.

Step 5: Then skp900 pops out the message “INSRT THE 1^ST KEY,TURN IGN ON AND WAIT FOR 5 MIN”. Current number of keys: 2.. Press “YES” to finish this step.

Step 6: Orderly insert next keys. Turn IGN on and wait for 5 minutes. 

Step 7: Click ”No” to finish all procedure and go back to the main interface. Finally, try to test new programmed keys.

Unplug skp-900 key programmer from vehicle.

http://www.key-programmer.org/2016/08/02/skp900-program-key-for-ford-mustang/