8/10/2015

SKP900 Key Programmer Program ID46 Nissan Key


Step 1 Connect SKP-900 Key Programmer to a Nissan OBD connector via Main Cable, start the car with a remote and wait a few seconds for SKP900 to start.

Step 2 Select Nissan, New Structure and choose Yes to continue.

Step 3 Select Key 1 and choose Yes


Step 4 Select Immobilizer System according to the cars Immo and choose Yes.


Step 5 Wait for a few minutes until SKP900 communicates with the car.


Step 6 Select Function, System Selection then Key Adapt and choose Yes.


Step 7 Choose Yes.


Step 8 According to the instruction on screen, you should insert a new key and turn IGN on. You may see the IMMO indicator light will flash when inserting a key which cannot start engine. Select Yes.

Step 9 Close IGN switch and select Yes.


Step 10 Wait for system adapting and then open IGN switch and select Yes.


Step 11 Wait for a few minutes and the key is programmed successfully.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.